The Bead Style Seed Bead Cover Necklace by Fernando DaSilva

We are so proud to showcase the dramatic multistrand seed bead necklace created by our Product Development and Creative Manager Fernando DaSilva for the cover and featured article in the March 2014 Bead Style magazine.  Bead Style quoted Fernando as saying “I was inspired to create this necklace by the women of the Ipanema neighbourhood in Rio de Janeiro.  Seed beads are very popular in Brazilian culture, where women wear bright necklaces in tropical colours.  I added the colour-blocking style to give this necklace extra pizzazz.”

Here are all the seed beads (7) and the fire polished pink beads that Fernando used for his necklace.  (Only one seed bead picture is missing.)

Czech Seed bead 11/0 Light Pink  Rainbow Transparent

Czech Seed bead 11/0 Light  Orange Matte Dyed

Czech Seed bead 11/0 Light Blue AB Opaque

Czech Seed bead 11/0 Ivory Opaque Pearl

Czech Seed bead 11/0 Light Pink Solgel

Czech Seed Bead 11/0 Pink Silver Lined Dyed

PLUS

Also, Fernando used  Czech Seedbead 11/0 Pink Metallic Solgel – no picture available.

Fire Polished 8mm Pink Opal Beads

These are the fire polished pink opal beads featured throughout.

 

Bead Style has a wonderful set of instructions from Fernando explaining how to make your own version of the necklace using difference colour palettes.

One necklace also prominently features an Instant Glam by Fernando bezel.

Congratulations Fernando!

Golden Days Necklace – A Fernando DaSilva Atelier Project

Materials

2g Delica 8/0 rd gun metal

8 icy bead pebble metallic gold – 2780 0486-06s8

8 large bronze jump rings

1 topaz 14mm SWAROVSKI ELEMENTS rivoli stone

14 xilion pp18 SWAROVSKI ELEMENTS gsha chatton

2 large wood rings

9 textured 22mm gold curved pewter links

1 pewter bail sun rays 20mm gold plated

Gilder’s paste – Foundry Bronze

Gilder’s paste –Antique Gold

2 part epoxy clay Apoxie – orange

21 pieces of 14inch gold twisted cord

5 antique brass chain

1ft gold-plated German style wire

G-S-Hypo cement glue

Tools:  Side cutter,  Flat noseRound nose

Instructions:

1. Use a small piece of sand paper to sand the work surface of a wood ring. Repeat the same with a second wood ring. Attach one gold-plated bail onto one of the rings and set aside. 

2. Follow packaging instructions to mix 2 part epoxy clay to be molded on top of wood rings. Spread clay on top of sanded area molding around of the edge slightly elevated. Preserve an open area right across gold-plated bail – middle of the ring. The quantity of clay used on each ring will be divided in two portions, leaving two sections of the ring exposed.

3.  Once clay is molded on top of rings, use a sponge, brush or small piece of cloth to rub gilders paste on top of clay before it starts hardening.  Cover both sides and and edges of wood ring with gilders paste. Use one color as background and then add second color to create a ore interesting effect.

4. Adding components on top of Apoxie clay.

Ring 1: topaz rivoli + four gold icy pebble beads + 8 golden shade crystal chatton stones + 74 delica seed beads.

Ring 2:  four icy gold pebble beads + 14 golden shade crystal chatton crystal stones + 38 delica seed beads

Add big components first and then sprinkle delicas and set crystal stones on top of clay.

Please, use the photo as a guide when your placing components on top of clay.

Let both rings cure for 24 hours.

5. Cut 21 pieces of 15-inch length of twisted gold cord.

6. Cut 1ft of 20 gauge of gold-plated German style wire.  Put all the cords together and begin wrapping wire right in the middle to create a tassel with it. Using one of the ends of wire, wrap wire 5 times to secure all the strands of cord together.  Make the sixth turn to go around the other long end of wire and wrap it around its base 5 times and then trim excess wire.  Be careful not to cut the wrong end of wire.

7. Cut a 20-inch piece of twisted gold cord. Wrap each tip of the cord three times around the cords put together on step 6 and holding both tips tight a double know to tighten all the cord ends together and finish forming a tassel. Add several dabs of stringing glue underneath of knot. Use same glue to cover ¼-inch on each cord ends.

8. Use large portion of round nose pliers to make half loop of wire tip form step 6.

Slide over the loop five gold-plated textured rings, then start finishing the loop wrapping several times around its base. Open a large jump ring and scoop up tassel through its loop. Open another jump ring and attach through the loop of bail of wood ring.

9. Section gold antique chain on the following sizes: four pieces of 3-inch, and then two pieces of 21-inch. Set all section of chain aside.

11. Open a link of one of the pieces of chain and attach to jump ring of wood ring. Close link and then add a second piece of chain on same fashion.

12. Repeat step 11 attaching both ends of both chains to another large jump ring and then attach to wood ring # 2. Place jump ring over the open space left between both sections ornate with components set on Apoxie clay. Add a second large jump ring on the opposite side.

13. Open one of the end links of a 22-inch piece of chain and attach to large jump ring attached to previous piece. Add second piece of chain on same fashion.

14. Create a intertwined section over the final 3-inch length of chain linking components on following pattern:

one large jump ring + two gold-plated fancy links + large jump ring + two gold-plated fancy links .

15. Weave the chain inside and out of the rings to create an interesting visual appeal.

16. Finishing necklace attaching both final links of antique gold chain to center large jump ring. Close links carefully.

Designer’s Tips:

1. Many components were “randomly” placed on top of Apoxie clay.

2. Perfect measurements are not important on this project. Create your own version based on this design but feel free yourself to make it your own.

Fernando has created many pieces of jewelry which are displayed in the John Bead showroom.  Some of these designs appear in our catalogues and may have been published.  For those of you who can’t visit in person we will have a regular post on this blog giving you a closer look at the finished jewelry.  Fernando has written all the instructions and is sharing them with you. Welcome to the series we call: Fernando DaSilva’s Atelier.