Pearlvine Necklace by Fernando DaSilva

The Pearlvine necklace by Fernando Dasilva features pearls as the highlighted component. We have so many pearls in our catalog to select from.  For this post, we have attached information to a special collection of Czech glass pearls.

Fernando has created many pieces of jewelry which are displayed in the John Bead showroom.  Some of these designs appear in our catalogues and may have been published.For those of you who can’t visit in person we have been showcasing his design work here on the John Bead blog.  

 

Instructions:

1. Using chain nose pliers take apart 2 equal pieces of 5 oval links sections off the silver matte chain. Set them aside.

2. Repeat previous step to take apart 2 equal sections of round links section of same chain with connectors in.

3. Using a 5 inches piece of satin gold stringing wire string beads as follows:

one bead bumper + one pearl + one bead bumper + one pearl + one bead bumper + one pearl + one bead bumper + one square bead cap + one crystal cube + one bead  cap . Repeat in reverse and then add one crimp tube.

4. Add one section of chain cut in step 1 attaching it through oval link. Pass opposite end of stringing wire through same crimp tube. Pull them together and with crimper tool secure it in place making sure each wire is sitting parallel to each other.

5. Repeat step 3 to create 4 more pearl circles in same fashion, adding another section of chain before you crimp the last pearl circle.

6. Open connector of small section of chain and attach to oval links of both ends. Repeat the same on the other half of your necklace. This will give a more substantial look to the structure of your piece.

7. Open two small jump rings to attach clasps to both sides of necklace.

Tips:

Please read the instructions before you start making your piece.

* If you desire to add more dimension and drama to your piece build pearl circles with 2 more sizes of pearls. You can have circles made with any bead sizes you want.

 **To make it funkier you can hung several pieces of small Figaro style chain to every circle. Think: luscious!!!

Materials Used

Several strand of pearls – your favorite colours

5 Swarovski 8mm crystal golden shadow cube beads

40 bead bumpers

10 brass bead cap squares

5 gold plated #3 crimp tubes

2 small gold plated round jump rings

2ft of white matte silver chain

2ft of 19 strands Beadalon .018” gold satin stringing wire

1 bronze hook and eye clasp

Tools 

Side Cutter   Flat Nose Crimper tool

 

This entry was posted in Beadalon, Chain, Clasps, Dazzle-it Pearls, Fernando DaSilva Atelier, Glass Beads, Pearls, SWAROVSKI Innovations and tagged , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *